| With display |
No |
| Voltage type for actuating |
AC/DC |
| Rated operating voltage Ue |
200 V |
| Rated control supply voltage at AC 50 Hz |
100 V |
| Rated control supply voltage at AC 60 Hz |
100 V |
| Overload current |
8.3 A |
| Controller type |
SMC-3 |
| DV/DT protection |
1000V/µs for power circuit |
| Repetitive peak voltage |
1400V per UL/CSA/NEMA for power circuit |
| Operating frequency |
50/60 Hz per UL/CSA/NEMA for power circuit |
| Line connected motor power, max |
7.5…15 Hp @ 460V AC, 60 Hz, 3-phase |
| Delta connected motor power, max |
7.5…20 Hp @ 460V AC, 60 Hz, 3-phase |
| Overvoltage category |
III per IEC for side mount auxiliary contacts |
| Rated impulse voltage |
6 kV for power circuit |
| Dielectric withstand |
2500V AC per IEC for power circuit |
| Line connected motor current |
9.2…25 A @ 380/400/415/460V AC, 3-phase |
| Delta connected motor current |
14.3…43 A @ 380/400/415/460V AC, 3-phase |
| Insulation voltage |
Rated 600V AC per UL/CSA/NEMA for power circuit |
| Rated operational voltage |
250V AC/30V DC per UL/CSA/NEMA for Side mount auxiliary contacts |
| Rated control power during start with fan |
215 mA @ 120V AC/180 mA @ 240V AC, 800 mA @ 24V DC/660 mA @ 24V AC |
| Input OFF-state current |
<10 mA, <12 mA @ input OFF-state voltage (IN1, IN2) for control circuit |
| Short-circuit protection device list |
Non-time delay Thermal magnetic circuit breaker High capacity time delay class CC/J/L |
| Number of contacts |
TB-97, -98 (OVLD/Fault): 1 for auxiliary contacts |
| High capacity available fault current, max |
70 kA @ 600V, maximum current 90 A time delay Class J or Class L fuse for inside delta connected motors |
| Type of current |
TB-97, -98 (OVLD/Fault): AC/DC for auxiliary contacts |
| Conventional thermal current (Ith) |
TB-97, -98 (OVLD/Fault): 1 A for auxiliary contacts |
| Type of control circuit |
TB-97, -98 (OVLD/Fault): Electromagnetic relay for auxiliary contacts |
| Type of contacts |
TB-97, -98 (OVLD/Fault): Normally Open (N.O.) for auxiliary contacts |
| Utilization category |
TB-23, -24 (normal/up-to-speed), TB-33, -34 (normal/up-to-speed): C300/R150 per UL/CSA/NEMA for Side mount auxiliary contacts |
| Rated operational current, max |
TB-97, -98 (OVLD/Fault): 0.6 A @ 120V AC and 0.3 A @ 240V AC for auxiliary contacts |
| Standard controller feature |
Soft stop |
| Standard available fault current, max |
5 kA @ maximum standard fuse 150 A for delta device operational current rating |
| Integrated motor overload protection |
Yes |
| Short circuit protection device performance (SCPD) type |
Type 1 |
| Selectable overload trip class |
Trip Class 10, 15, or 20 |
| Selectable start times |
2, 5, 10, 15, 20, 25, or 30 s |
| Input OFF-state voltage (IN1, IN2), max |
40V AC, 17V DC/12V AC for control circuit |
| Selectable current limit |
150%, 250%, 350%, and 450% of full load current |
| Input ON-state voltage, during start (IN1, IN2) |
85V AC, 19.2V DC/19.2V AC minimum for control circuit |
| Rated control power during start without fan |
205 mA @ 120V AC/145 mA @ 240V AC, 705 mA @ 24V DC/580 mA @ 24V AC |
| Input ON-state current (IN1, IN2) |
9.8 mA @ 120V AC/19.6 mA @ 240V AC for control circuit, 7.3 mA @ 24V AC/DC for control circuit |
