Description
range of product | Modicon Premium Automation platform |
---|---|
product or component type | Counter modules |
I/O modularity | 4 channels |
electrical circuit type | Auxiliary output conforming to EN/IEC 61131 |
counting frequency | 40 kHz |
---|---|
power dissipation in W | 8…11.5 W |
cycle time | 10 ms |
discrete input logic | Current sink for auxiliary input (preset, enable and read) conforming to IEC 1131 Type 2 Resistive for 2/3-wire proximity sensors PNP/NPN conforming to IEC 1131 Type 2 Resistive for encoder input |
input logic | Positive |
input compatibility | Incremental encoder 10…30 V totem pole Incremental encoder 5 V DC RS422 |
input voltage | 24 V 18 mA 2/3-wire proximity sensors PNP/NPN 24 V 7 mA auxiliary input (preset, enable and read) 5 V 18 mA encoder input |
input voltage limits | <= 5.5 V encoder input 19…30 V 2/3-wire proximity sensors PNP/NPN 19…30 V auxiliary input (preset, enable and read) |
voltage state 1 guaranteed | >= 11 V for 2/3-wire proximity sensors PNP/NPN >= 11 V for auxiliary input (preset, enable and read) >= 2.4 V for encoder input |
current state 1 guaranteed | >= 3.7 mA (encoder input) >= 6 mA (2/3-wire proximity sensors PNP/NPN) >= 6 mA (auxiliary input (preset, enable and read)) |
voltage state 0 guaranteed | <= 1.2 V for encoder input <= 5 V for 2/3-wire proximity sensors PNP/NPN <= 5 V for auxiliary input (preset, enable and read) |
current state 0 guaranteed | <= 1 mA (encoder input) <= 2 mA (2/3-wire proximity sensors PNP/NPN) <= 2 mA (auxiliary input (preset, enable and read)) |
response time | < 2.5 ms sensor voltage at loss of 24 V auxiliary input (preset, enable and read) |
input impedance | Encoder input: > 270 Ohm at U = 2.4 V 2/3-wire proximity sensors PNP/NPN: 1400 Ohm at Un Auxiliary input (preset, enable and read): 3400 Ohm at Un Encoder input: 400 Ohm at Un |
output voltage | 24 V DC |
nominal output current | 0.5 A |
output voltage limits | 19…30 V |
maximum voltage drop | <0.5 V at state 1 |
output compatibility | Positive logic DC inputs (resistance <= 15 kOhm) for auxiliary output |
maximum leakage current | 0.1 mA |
switching frequency | < 0.6/LI² Hz on inductive load load |
output overload protection | Thermal tripping via program or automatically Current limiter |
output short-circuit protection | Thermal tripping via program or automatically Current limiter |
output overvoltage protection | Zener diode |
reverse polarity protection | Reverse diode on supply |
checks | Sensor power supply |
current consumption | 330 µA at 5 V DC 36 mA at 24 V DC |
module format | Standard |
local signalling | 1 LED (green) for module operating (RUN) 1 LED (red) for external fault (I/O) 1 LED (red) for internal fault, module failure (ERR) 4 LEDs (green) for axis diagnostics available (CH.) |
electrical connection | 2 connectors HE-10, 20 pins 4 connectors SUB-D 15 |
net weight | 0.43 kg |
protective treatment | TC |
---|---|
ambient air temperature for operation | 0…60 °C |
ambient air temperature for storage | -25…70 °C |
relative humidity | 5…95 % without condensation |
operating altitude | <= 2000 m |
Unit Type of Package 1 | PCE |
---|---|
Number of Units in Package 1 | 1 |
Package 1 Weight | 570.0 g |
Package 1 Height | 6.0 cm |
Package 1 width | 18.0 cm |
Package 1 Length | 26.0 cm |
Unit Type of Package 2 | S04 |
Number of Units in Package 2 | 12 |
Package 2 Weight | 7.5 kg |
Package 2 Height | 30.0 cm |
Package 2 width | 40.0 cm |
Package 2 Length | 60.0 cm |