Description
Description
| RANGE OF PRODUCT | Modicon Premium Automation platform |
|---|---|
| PRODUCT OR COMPONENT TYPE | Counter modules |
| I/O MODULARITY | 2 channels |
| ELECTRICAL CIRCUIT TYPE | Auxiliary output conforming to EN/IEC 61131 |
| COUNTING FREQUENCY | 40 kHz |
|---|---|
| POWER DISSIPATION IN W | 4.5…6 W |
| CYCLE TIME | 5 ms |
| DISCRETE INPUT LOGIC | Current sink for auxiliary input (preset, enable and read) conforming to IEC 1131 Type 2 Resistive for 2/3-wire proximity sensors PNP/NPN input conforming to IEC 1131 Type 2 Resistive for encoder input |
| INPUT LOGIC | Positive |
| INPUT COMPATIBILITY | 2/3-wire proximity sensors PNP/NPN Incremental encoder 10…30 V totem pole Incremental encoder 5 V DC RS422 |
| INPUT VOLTAGE | 24 V 18 mA 2/3-wire proximity sensors PNP/NPN 24 V 7 mA auxiliary input (preset, enable and read) 5 V 18 mA encoder input |
| INPUT VOLTAGE LIMITS | <= 5.5 V encoder input 19…30 V 2/3-wire proximity sensors PNP/NPN 19…30 V auxiliary input (preset, enable and read) |
| VOLTAGE STATE 1 GUARANTEED | >= 11 V for 2/3-wire proximity sensors PNP/NPN >= 11 V for auxiliary input (preset, enable and read) >= 2.4 V for encoder input |
| CURRENT STATE 1 GUARANTEED | >= 3.7 mA (encoder input) >= 6 mA (2/3-wire proximity sensors PNP/NPN) >= 6 mA (auxiliary input (preset, enable and read)) |
| VOLTAGE STATE 0 GUARANTEED | <= 1.2 V for encoder input <= 5 V for 2/3-wire proximity sensors PNP/NPN <= 5 V for auxiliary input (preset, enable and read) |
| CURRENT STATE 0 GUARANTEED | <= 1 mA (encoder input) <= 2 mA (2/3-wire proximity sensors PNP/NPN) <= 2 mA (auxiliary input (preset, enable and read)) |
| RESPONSE TIME | < 2.5 ms sensor voltage at loss of 24 V auxiliary input (preset, enable and read) |
| INPUT IMPEDANCE | Encoder input: > 270 Ohm at U = 2.4 V 2/3-wire proximity sensors PNP/NPN: 1400 Ohm at Un Auxiliary input (preset, enable and read): 3400 Ohm at Un Encoder input: 400 Ohm at Un |
| OUTPUT VOLTAGE | 24 V DC |
| NOMINAL OUTPUT CURRENT | 0.5 A |
| OUTPUT VOLTAGE LIMITS | 19…30 V |
| MAXIMUM VOLTAGE DROP | <0.5 V at state 1 |
| OUTPUT COMPATIBILITY | Positive logic DC inputs (resistance <= 15 kOhm) for auxiliary output |
| MAXIMUM LEAKAGE CURRENT | 0.1 mA |
| SWITCHING FREQUENCY | < 0.6/LI² Hz on inductive load load |
| OUTPUT OVERLOAD PROTECTION | Thermal tripping via program or automatically Current limiter |
| OUTPUT SHORT-CIRCUIT PROTECTION | Thermal tripping via program or automatically Current limiter |
| OUTPUT OVERVOLTAGE PROTECTION | Zener diode |
| REVERSE POLARITY PROTECTION | Reverse diode on supply |
| CHECKS | Sensor power supply |
| CURRENT CONSUMPTION | 280 mA at 5 V DC 30 mA at 24 V DC |
| MODULE FORMAT | Standard |
| LOCAL SIGNALLING | 1 LED (green) for module operating (RUN) 1 LED (red) for external fault (I/O) 1 LED (red) for internal fault, module failure (ERR) 2 LEDs (green) for axis diagnostics available (CH.) |
| ELECTRICAL CONNECTION | 1 connector HE-10, 20 pins 2 connectors SUB-D 15 |
| NET WEIGHT | 0.32 kg |
| PROTECTIVE TREATMENT | TC |
|---|---|
| AMBIENT AIR TEMPERATURE FOR OPERATION | 0…60 °C |
| AMBIENT AIR TEMPERATURE FOR STORAGE | -25…70 °C |
| RELATIVE HUMIDITY | 5…95 % without condensation |
| OPERATING ALTITUDE | <= 2000 m |
| UNIT TYPE OF PACKAGE 1 | PCE |
|---|---|
| NUMBER OF UNITS IN PACKAGE 1 | 1 |
| PACKAGE 1 HEIGHT | 5.5 cm |
| PACKAGE 1 WIDTH | 18.0 cm |
| PACKAGE 1 LENGTH | 26.0 cm |
| PACKAGE 1 WEIGHT | 489.0 g |
