Sale!

STBDAO8210K

$ 51.00

In stock

Category:

Description

Main
range of product Modicon STB distributed I/O solution
product or component type Standard digital output kit
kit composition STBXTS1100, 5-terminal screw type connector
STBDAO8210 module
STBXTS2110, 5-terminal spring clamp connector
STBXBA2000 base
discrete output number 2
discrete output type Triac
discrete output voltage 115…230 V
discrete output voltage type AC
Complementary
discrete output current 1000 mA 60 °C
2000 mA 30 °C
discrete output logic Positive or negative
output voltage 20…265 V AC
absolute maximum voltage 300 V 10 s
400 V 20 ms
response time 10 ms off-to-on
10.5 ms on-to-off
cold swapping Yes
hot swapping Yes for standard NIMs
fallback State 0 basic NIMs
User configurable standard NIMs
protection type Output surge protection varistance and RC circuit
insulation between channels and logic bus 1780 V for 1 minute
maximum leakage current 2 mA at state 0 115 V
2.5 mA at state 0 230 V
surge current 20 A 40 ms
30 A 20 ms
minimum load 5 mA
reset Manual or automatic reset COM fault
product compatibility I/O base STBXBA2000
Power distribution module STBPDT2100/2105
supply Power distribution module
current consumption 45 mA at 5 V DC for logic bus
marking CE
overvoltage category II
status LED 1 LED (green) module status (RDY)
1 LED per channel (green) channel status (OUT1 to OUT2)
1 LED (red) module error (ERR)
height 18.4 mm
depth 70 mm
width 128.3 mm
net weight 0.125 kg
Environment
standards EN/IEC 61131-2
product certifications UL
CSA
FM Class 1 Division 2
pollution degree 2 conforming to IEC 60664-1
operating altitude <= 2000 m
IP degree of protection IP20 conforming to EN 61131-2 class 1
ambient air temperature for operation 0…60 °C (without derating)
ambient air temperature for operation 32…140 °F without derating
ambient air temperature for storage -40…85 °C without derating
ambient air temperature for storage -40…185 °F without derating
relative humidity 95 % at 60 °C without condensation
vibration resistance 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail
5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail
+/-0.35 mm at 10…58 Hz
shock resistance 30 gn for 11 ms conforming to IEC 88 reference 2-27
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Weight 142.0 g
Package 1 Height 2.7 cm
Package 1 width 8.0 cm
Package 1 Length 13.0 cm
Unit Type of Package 2 S02
Number of Units in Package 2 28
Package 2 Weight 3.976 kg
Package 2 Height 15.0 cm
Package 2 width 30.0 cm
Package 2 Length 40.0 cm
Unit Type of Package 3 PAL
Number of Units in Package 3 448
Package 3 Weight 63.616 kg
Package 3 Height 60.0 cm
Package 3 width 80.0 cm
Package 3 Length 448.0 cm