Description
| RANGE OF PRODUCT | Modicon STB distributed I/O solution |
|---|---|
| PRODUCT OR COMPONENT TYPE | Standard analog input kit |
| KIT COMPOSITION | STBXTS2100, 6-terminal spring clamp connector STBXTS1100, 6-terminal screw type connector STBXBA2000 base STBACI0320 module |
| ANALOGUE INPUT TYPE | Current 0…20 mA Current 4…20 mA |
| ANALOGUE INPUT NUMBER | 4 |
| ANALOGUE INPUT RESOLUTION | 15 bits + sign |
| TYPE OF FILTER | Single low pass input filter 985 Hz |
| ABSOLUTE MAXIMUM INPUT | 25 mA/50 V DC |
|---|---|
| COLD SWAPPING | Yes |
| HOT SWAPPING FALLBACK | Yes for standard NIMs |
| FALLBACK STATUS | State 0 basic NIMs User configurable standard NIMs |
| DATA FORMAT | IEC 61131-2 EN 61131-2 |
| UPDATE TIME | 10 ms |
| INTEGRAL LINEARITY | +/- 0.05 %FS |
| INPUT IMPEDANCE | 250 Ohm |
| MAXIMUM SUPPLY CURRENT FOR SENSORS | 25 mA per input channels |
| PROTECTION TYPE | Short-circuit protection |
| ABSOLUTE ACCURACY ERROR | +/- 0.4 % of full scale 25 °C |
| TEMPERATURE DRIFT | +/-0.005 %/°C |
| INSULATION BETWEEN CHANNELS AND LOGIC BUS | 1780 V for 1 minute |
| INSULATION BETWEEN CHANNELS AND SENSOR BUS | 200 V |
| ADDRESSING REQUIREMENT | 8 input words |
| PRODUCT COMPATIBILITY | Mounting base STBXBA2000 Power distribution module STBPDT3100/3105 |
| [US] RATED SUPPLY VOLTAGE | 24 V DC |
| SUPPLY | Power distribution module |
| CURRENT CONSUMPTION | 95 mA at 5 V DC for logic bus |
| MARKING | CE |
| OVERVOLTAGE CATEGORY | II |
| STATUS LED | 1 LED (green) module status (RDY) 1 LED (red) module error (ERR) |
| DEPTH | 70 mm |
| HEIGHT | 18.4 mm |
| WIDTH | 128.3 mm |
| PRODUCT CERTIFICATIONS | CSA UL FM Class 1 Division 2 ATEX Cat 3G C-Tick |
|---|---|
| POLLUTION DEGREE | 2 conforming to IEC 60664-1 |
| OPERATING ALTITUDE | <= 2000 m |
| IP DEGREE OF PROTECTION | IP20 conforming to EN 61131-2 class 1 |
| AMBIENT AIR TEMPERATURE FOR OPERATION | -25…70 °C |
| AMBIENT AIR TEMPERATURE FOR OPERATION | 32…140 °F without derating |
| AMBIENT AIR TEMPERATURE FOR STORAGE | -40…85 °C without derating |
| AMBIENT AIR TEMPERATURE FOR STORAGE | -40…185 °F without derating |
| RELATIVE HUMIDITY | 95 % at 60 °C without condensation |
| VIBRATION RESISTANCE | +/-0.35 mm at 10…58 Hz 3 gn at 58…150 Hz on 35 x 7.5 mm symmetrical DIN rail 5 gn at 58…150 Hz on 35 x 15 mm symmetrical DIN rail |
| SHOCK RESISTANCE | 30 gn for 11 ms conforming to IEC 88 reference 2-27 |
| UNIT TYPE OF PACKAGE 1 | PCE |
|---|---|
| NUMBER OF UNITS IN PACKAGE 1 | 1 |
| PACKAGE 1 WEIGHT | 146.0 g |
| PACKAGE 1 HEIGHT | 2.7 cm |
| PACKAGE 1 WIDTH | 13 cm |
| PACKAGE 1 LENGTH | 8 cm |
| UNIT TYPE OF PACKAGE 2 | S02 |
| NUMBER OF UNITS IN PACKAGE 2 | 28 |
| PACKAGE 2 WEIGHT | 4.514 kg |
| PACKAGE 2 HEIGHT | 15 cm |
| PACKAGE 2 WIDTH | 30 cm |
| PACKAGE 2 LENGTH | 40 cm |
