$ 888.00

In stock



range PowerLogic
product name PowerLogic PM5350
device short name PM5350
product or component type Power meter
power quality analysis Total demand distortion
total harmonic distortion
device application Power monitoring
type of measurement Current
Power factor
Phase angle
Apparent power
Active power
Reactive power
supply voltage 85…265 V AC 45…65 Hz
100…300 V DC
network frequency 50 Hz
60 Hz
[In] rated current 5 A
1 A
type of network 1P + N
3P + N
maximum power consumption in VA 9.6 VA
ride-through time 80 ms 120 V AC typical
100 ms 230 V AC typical
100 ms 415 V AC typical
display type Backlit LCD
display resolution 6 lines
sampling rate 32 samples/cycle
measurement current 0…1 A
0…5 A
analogue input type Current 0.05…9 A (impedance <= 0.3 Ohm)
measurement voltage 20…690 V AC phase to phase
20…400 V AC phase to neutral
frequency measurement range 45…70 Hz
number of inputs 4 digital
measurement accuracy Current 0.3 %
Voltage 0.3 %
Frequency 0.05 %
Power factor +/- 0.005
accuracy class Class 0.5S active energy conforming to IEC 62053-22
Class 0.5 active energy conforming to IEC 61557-12
Class 3 reactive energy conforming to IEC 62053-23
Class 2 reactive energy conforming to IEC 61557-12
Class 0.5 power conforming to IEC 61557-12
number of outputs 2 relay
information displayed Tariff (4)
communication port protocol JBUS
Modbus RTU and ASCII at 9.6, 19.2 and 38.4 kbauds
communication port support Terminal block: RS485
data recording Min/max of instantaneous values
connections – terminals Voltage circuit: screw terminal block4
Control circuit: screw terminal block2
Current transformer: screw terminal block6
Input/output circuit: screw terminal block6
Relay output: screw terminal block4
Ethernet network: RJ45 connector
mounting mode Flush-mounted
type of installation Indoor installation
standards IEC 61010-1
product certifications CE
width 96 mm
depth 44 mm
height 96 mm
net weight 0.25 kg
electromagnetic compatibility Limitation of voltage changes, voltage fluctuations and flicker in low-voltage conforming to IEC 61000-3-3
Electrostatic discharge conforming to IEC 61000-4-2
Susceptibility to electromagnetic fields conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test conforming to IEC 61000-4-4
1.2/50 µs shock waves immunity test conforming to IEC 61000-4-5
Conducted RF disturbances conforming to IEC 61000-4-6
Immunity to impulse waves conforming to IEC 61000-4-12
Conducted and radiated emissions class A conforming to EN 55011
Limits for harmonic current emissions conforming to IEC 61000-3-2
overvoltage category III
IP degree of protection IP30 back: conforming to IEC 60529
IP51 front face: conforming to IEC 60529
relative humidity 0…95 % at 50 °C
pollution degree 2
ambient air temperature for operation -25…70 °C
ambient air temperature for storage -40…85 °C
operating altitude 0…3000 m
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Weight 358.0 g
Package 1 Height 11.2 cm
Package 1 width 12.5 cm
Package 1 Length 12.7 cm
Unit Type of Package 2 S03
Number of Units in Package 2 12
Package 2 Weight 4.962 kg
Package 2 Height 30.0 cm
Package 2 width 30.0 cm
Package 2 Length 40.0 cm
Unit Type of Package 3 P12
Number of Units in Package 3 288
Package 3 Weight 216.0 kg
Package 3 Height 105.0 cm
Package 3 width 80.0 cm
Package 3 Length 120.0 cm