Description
range of product | Modicon X80 |
---|---|
product or component type | Discrete I/O module |
discrete input number | 8 |
input type | Current sink (logic positive) |
discrete input voltage | 24 V DC, discrete input logic: positive |
discrete input current | 3.5 mA |
discrete output number | 8 |
discrete output type | Solid state |
discrete output voltage | 24 V 19…30 V DC |
discrete output current | 0.5 A |
input compatibility | With 2-wire/3-wire proximity sensors conforming to IEC 60947-5-2 With 2-wire/3-wire proximity sensors conforming to IEC 61131-2 type 3 |
---|---|
Sensor power supply | 19…30 V |
current state 1 guaranteed | >= 3 mA |
current state 0 guaranteed | <= 1.5 mA |
current per channel | 0.625 A |
maximum current per module | 5 A |
maximum leakage current | 0.5 mA at state 0 |
maximum voltage drop | <1.2 V at state 1 |
input impedance | 6800 Ohm |
insulation resistance | > 10 MOhm 500 V DC |
power dissipation in W | 3.7 W |
DC typical response time | 4 ms |
DC maximum response time | 7 ms |
response time on output | 1.2 ms |
paralleling of outputs | Yes : 2 maximum |
typical current consumption | 79 mA at 3.3 V DC 59 mA at 24 V DC |
current consumption | <= 111 mA at 3.3 V DC <= 67 mA at 24 V DC |
MTBF reliability | 427772 H |
protection type | 1 external fuse per group of input channel0.5 A fast blow overvoltage protection on output reverse polarity protection on input reverse polarity protection on output |
output overload protection | With current limiter With electronic circuit breaker 1.5 In < Id < 2 In |
output overvoltage protection | With transil diode |
output short-circuit protection | With 2 A external fuse |
reverse polarity protection | Reverse mounted diode |
voltage detection threshold | < 14 V DC preactuator fault < 14 V DC sensor fault > 18 V DC preactuator OK > 18 V DC sensor OK |
switching frequency | 0.5/LI² Hz |
maximum overload time | 15 ms |
load impedance ohmic | >= 48 Ohm |
status LED | 1 LED (green) module operating (RUN) 1 LED per channel (green) channel diagnostic 1 LED (red) module error (ERR) 1 LED (red) module I/O |
net weight | 0.115 kg |
IP degree of protection | IP20 |
---|---|
directives | 2014/35/EU – low voltage directive 2014/30/EU – electromagnetic compatibility |
dielectric strength | 1500 V AC at 50/60 Hz 1 minute, output/ground 1500 V AC at 50/60 Hz 1 minute, output/internal logic 1500 V AC at 50/60 Hz 1 minute, primary/secondary 500 V DC 1 minute, between group of inputs and outputs |
vibration resistance | 3 gn |
shock resistance | 30 gn |
ambient air temperature for storage | -40…85 °C |
ambient air temperature for operation | 0…60 °C |
relative humidity | 5…95 % at 55 °C without condensation |
operating altitude | 0…2000 m 2000…5000 m with derating factor |
Unit Type of Package 1 | PCE |
---|---|
Number of Units in Package 1 | 1 |
Package 1 Weight | 145.0 g |
Package 1 Height | 5.5 cm |
Package 1 width | 11.0 cm |
Package 1 Length | 12.0 cm |
Unit Type of Package 2 | S02 |
Number of Units in Package 2 | 15 |
Package 2 Weight | 2.44 kg |
Package 2 Height | 15.0 cm |
Package 2 width | 30.0 cm |
Package 2 Length | 40.0 cm |