$ 198.00

In stock



range of product Modicon X80
product or component type Discrete output module
product specific application For severe environments
discrete output number 16 conforming to EN/IEC 61131-2
discrete output type Solid state
discrete output logic Positive
discrete output voltage 24 V 19…30 V DC
discrete output current 0.5 A
current per channel 0.625 A
maximum current per module 10 A
maximum leakage current 0.5 mA at state 0
maximum voltage drop <1.2 V at state 1
insulation resistance > 10 MOhm 500 V DC
power dissipation in W 4 W
response time on output 1.2 ms
paralleling of outputs Yes : 2 maximum
typical current consumption 79 mA at 3.3 V DC
MTBF reliability 392285 H
protection type External fuse reverse polarity protection
short-circuit protection
overload protection
overvoltage protection
output overload protection With electronic circuit breaker 1.5 In < Id < 2 In
With current limiter
output overvoltage protection With transil diode
output short-circuit protection With 2 A external fuse
reverse polarity protection Reverse mounted diode
voltage detection threshold < 14 V DC preactuator fault
> 18 V DC preactuator at state 0
switching frequency 0.5/LI² Hz
load impedance ohmic > 48 Ohm
status LED 1 LED (green) module operating (RUN)
1 LED per channel (green) channel diagnostic
1 LED (red) module error (ERR)
1 LED (red) module I/O
net weight 0.12 kg
IP degree of protection IP20
directives 2014/35/EU – low voltage directive
2014/30/EU – electromagnetic compatibility
environmental characteristic Gas resistant class Gx
Gas resistant class 3C4
Dust resistant class 3S4
Sand resistant class 3S4
Salt resistant level 2
Mold growth resistant class 3B2
Fungal spore resistant class 3B2
dielectric strength 1500 V AC at 50/60 Hz 1 minute, output/ground
1500 V AC at 50/60 Hz 1 minute, output/internal logic
vibration resistance 3 gn
shock resistance 30 gn
ambient air temperature for storage -40…85 °C
ambient air temperature for operation -25…70 °C
relative humidity 5…95 % at 55 °C without condensation
protective treatment Conformal coating
operating altitude 0…2000 m
2000…5000 m with derating factor
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Weight 171.0 g
Package 1 Height 5.5 cm
Package 1 width 11.0 cm
Package 1 Length 11.5 cm
Unit Type of Package 2 S02
Number of Units in Package 2 15
Package 2 Weight 2.991 kg
Package 2 Height 15.0 cm
Package 2 width 30.0 cm
Package 2 Length 40.0 cm