Description
| range of product | Modicon X80 |
|---|---|
| product or component type | Mixed analog I/O module |
| electrical connection | 20 ways 1 connector |
| Isolation between channels | Non isolated |
| input level | High level |
| analogue input number | 4 |
| analogue input type | Current 0…20 mA Current 4…20 mA Voltage +/- 10 V Voltage 0…10 V Voltage 0…5 V Voltage 1…5 V |
| analogue input resolution | 12 bits 0…20 mA 12 bits 0…5 V 12 bits 1…5 V 12 bits 4…20 mA 13 bits 0…10 V 14 bits +/- 10 V |
|---|---|
| permitted overload on inputs | +/- 30 mA 0…20 mA +/- 30 mA 4…20 mA +/- 30 V +/- 10 V +/- 30 V 0…10 V +/- 30 V 0…5 V +/- 30 V 1…5 V |
| input impedance | 250 Ohm |
| precision of internal conversion resistor | 0.1 % – 15 ppm/°C |
| type of filter | First order digital filtering by firmware |
| fast read cycle time | 1 ms + 1 ms x number of channels used |
| nominal read cycle time | 5 ms for 4 channels |
| measurement error | 0.25 % of full scale 0…20 mA 25 °C output 0.25 % of full scale 4…20 mA 25 °C output <= 0.35 % of full scale +/- 10 V 0…60 °C input <= 0.35 % of full scale 0…10 V 0…60 °C input <= 0.35 % of full scale 0…5 V 0…60 °C input <= 0.35 % of full scale 1…5 V 0…60 °C input <= 0.5 % of full scale 0…20 mA 0…60 °C input <= 0.5 % of full scale 4…20 mA 0…60 °C input <= 0.6 % of full scale +/- 10 V 0…60 °C output <= 0.6 % of full scale 0…20 mA 0…60 °C output <= 0.6 % of full scale 4…20 mA 0…60 °C output 0.25 % of full scale +/- 10 V 25 °C output 0.25 % of full scale +/- 10 V 25 °C input 0.25 % of full scale 0…10 V 25 °C input 0.25 % of full scale 0…5 V 25 °C input 0.25 % of full scale 1…5 V 25 °C input 0.35 % of full scale 0…20 mA 25 °C input 0.35 % of full scale 4…20 mA 25 °C |
| temperature drift | 100 ppm/°C +/- 10 V output 100 ppm/°C 0…20 mA output 100 ppm/°C 4…20 mA output 30 ppm/°C +/- 10 V input 30 ppm/°C 0…10 V input 30 ppm/°C 0…5 V input 30 ppm/°C 1…5 V input 50 ppm/°C 0…20 mA input 50 ppm/°C 4…20 mA input |
| recalibration | Factory calibrated on outputs Internal on inputs |
| minimum crosstalk attenuation | 70 dB |
| Common mode rejection | 80 dB |
| isolation voltage | 1400 V DC between channels and ground 1400 V DC between channels and bus 750 V DC between group of I/O channels |
| output level | High level |
| analogue output number | 2 |
| analogue output type | Current: 0…20 mA Current: 4…20 mA Voltage: +/- 10 V |
| analogue output resolution | 11 bits, 0…20 mA 11 bits, 4…20 mA 12 bits, +/- 10 V |
| conversion time | <= 2 ms |
| maximum conversion value | +/- 11.25 V +/- 10 V output +/- 11.25 V +/- 10 V input 0…30 mA 0…20 mA input 0…30 mA 4…20 mA input +/- 11.25 V 0…10 V input +/- 11.25 V 0…5 V input +/- 11.25 V 1…5 V input 0…24 mA 0…20 mA output 0…24 mA 4…20 mA output |
| fallback mode | Predefined Configurable |
| operating altitude | 0…2000 m 2000…5000 m with derating factor |
| status LED | 1 LED (green) RUN 1 LED per channel (green) channel diagnostic 1 LED (red) ERR 1 LED (red) I/O |
| net weight | 0.155 kg |
| power consumption in W | 2.6 W 24 V DC typical 3.2 W 24 V DC maximum 0.35 W 3.3 V DC typical 0.48 W 3.3 V DC maximum |
| vibration resistance | 3 gn |
|---|---|
| shock resistance | 30 gn |
| ambient air temperature for storage | -40…85 °C |
| ambient air temperature for operation | 0…60 °C |
| relative humidity | 5…95 % at 55 °C without condensation |
| IP degree of protection | IP20 |
| directives | 2014/35/EU – low voltage directive 2014/30/EU – electromagnetic compatibility |
| product certifications | CE RCM CSA EAC Merchant Navy UL |
| standards | EN/IEC 61010-2-201 EN/IEC 61131-2 UL 61010-2-201 CSA C22.2 No 61010-2-201 |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Weight | 175.0 g |
| Package 1 Height | 5.5 cm |
| Package 1 width | 11.0 cm |
| Package 1 Length | 11.6 cm |
| Unit Type of Package 2 | S02 |
| Number of Units in Package 2 | 15 |
| Package 2 Weight | 2.88 kg |
| Package 2 Height | 15.0 cm |
| Package 2 width | 30.0 cm |
| Package 2 Length | 40.0 cm |
