Sale!

ATS22C48Q

Original price was: $ 4,960.00.Current price is: $ 3,816.00.

In stock

Category:

Description

Description

Main
RANGE OF PRODUCT Altistart 22
PRODUCT OR COMPONENT TYPE Soft starter
PRODUCT DESTINATION Asynchronous motors
PRODUCT SPECIFIC APPLICATION Pumps and fans
COMPONENT NAME ATS22
NETWORK NUMBER OF PHASES 3 phases
[US] RATED SUPPLY VOLTAGE 230…440 V – 15…10 %
MOTOR POWER KW 132 kW 230 V
250 kW 400 V
250 kW 440 V
FACTORY SETTING CURRENT 437 A
POWER DISSIPATION IN W 218 W for standard applications
UTILISATION CATEGORY AC-53A
TYPE OF START Start with torque control (current limited to 3.5 In)
ICL STARTER RATING 480 A for connection in the motor supply line for standard applications
IP DEGREE OF PROTECTION IP00
Complementary
ASSEMBLY STYLE With heat sink
FUNCTION AVAILABLE Internal bypass
SUPPLY VOLTAGE LIMITS 195…484 V
SUPPLY FREQUENCY 50…60 Hz – 10…10 %
NETWORK FREQUENCY 45…66 Hz
DEVICE CONNECTION In the motor supply line
To the motor delta terminals
[UC] CONTROL CIRCUIT VOLTAGE 230 V – 15…10 % 50/60 Hz
CONTROL CIRCUIT CONSUMPTION 20 W
DISCRETE OUTPUT NUMBER 2
DISCRETE OUTPUT TYPE Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
MINIMUM SWITCHING CURRENT 100 mA at 12 V DC (relay outputs)
MAXIMUM SWITCHING CURRENT 5 A 250 V AC resistive 1 relay outputs
5 A 30 V DC resistive 1 relay outputs
2 A 250 V AC inductive 0.4 20 ms relay outputs
2 A 30 V DC inductive 7 ms relay outputs
DISCRETE INPUT NUMBER 3
DISCRETE INPUT TYPE (LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
DISCRETE INPUT VOLTAGE 24 V <= 30 V
DISCRETE INPUT LOGIC Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
OUTPUT CURRENT 0.4…1 Icl adjustable
PTC PROBE INPUT 750 Ohm
COMMUNICATION PORT PROTOCOL Modbus
CONNECTOR TYPE 1 RJ45
COMMUNICATION DATA LINK Serial
PHYSICAL INTERFACE RS485 multidrop
TRANSMISSION RATE 4800, 9600 or 19200 bps
INSTALLED DEVICE 31
PROTECTION TYPE Phase failure: line
Thermal protection: motor
Thermal protection: starter
MARKING CE
TYPE OF COOLING Forced convection
OPERATING POSITION Vertical +/- 10 degree
HEIGHT 455 mm
WIDTH 304 mm
DEPTH 339.7 mm
NET WEIGHT 50 kg
MOTOR POWER RANGE AC-3 110…220 kW at 200…240 V 3 phases
250…500 kW at 380…440 V 3 phases
MOTOR STARTER TYPE Soft starter
Environment
ELECTROMAGNETIC COMPATIBILITY Conducted and radiated emissions level A conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5
STANDARDS EN/IEC 60947-4-2
PRODUCT CERTIFICATIONS GOST
CSA
UL
C-Tick
CCC
VIBRATION RESISTANCE 1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-6
1.5 mm (f= 2…13 Hz) conforming to EN/IEC 60068-2-6
SHOCK RESISTANCE 15 gn for 11 ms conforming to EN/IEC 60068-2-27
NOISE LEVEL 56 dB
POLLUTION DEGREE Level 2 conforming to IEC 60664-1
RELATIVE HUMIDITY 0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
AMBIENT AIR TEMPERATURE FOR OPERATION -10…40 °C (without derating)
40…60 °C (with current derating 2.2 % per °C)
AMBIENT AIR TEMPERATURE FOR STORAGE -25…70 °C
OPERATING ALTITUDE <= 1000 m without derating
> 1000…< 2000 m with current derating of 2.2 % per additional 100 m
Packing Units
UNIT TYPE OF PACKAGE 1 PCE
NUMBER OF UNITS IN PACKAGE 1 1
PACKAGE 1 WEIGHT 40.0 kg
PACKAGE 1 HEIGHT 54.5 cm
PACKAGE 1 WIDTH 40.0 cm
PACKAGE 1 LENGTH 57.5 cm
UNIT TYPE OF PACKAGE 2 PAL
NUMBER OF UNITS IN PACKAGE 2 1
PACKAGE 2 WEIGHT 40.0 kg
PACKAGE 2 HEIGHT 54.5 cm
PACKAGE 2 WIDTH 40.0 cm
PACKAGE 2 LENGTH 57.5 cm